
Plant Operator Training
Counterbalance Forklift Training Course
Operator training for the counterbalance forklift, ITSSAR-accredited or in-house certified, delivered in-company at your premises on your own machine. Course levels for novice, experienced and refresher operators.
- ITSSAR-accredited or in-house certificate
- Trusted since 1984
- In-company, UK-wide
- Novice to refresher levels
Key facts at a glance
- 3 levelsCourse optionsNovice, experienced and refresher
- In-companyDeliveryTutor-led at your site, UK-wide
- ITSSAR / TOPSCertificationAccredited, or in-house certificate
- B1, B2 & B3ITSSAR categoriesITSSAR categories B1, B2 and B3 cover counterbalance forklift trucks by lifting capacity.
Course options
Choose the right course level
Counterbalance forklift training is delivered in-company at three levels: choose by your operators’ experience. Durations are typical and flex with candidate numbers.
Novice course
New / inexperienced operators
5 days typical duration
- For operators with no previous experience on this truck type.
- Tutor-led, at your premises on your own machine
- Theory and practical operating skills
- Assessment and certificate included
Experienced course
Existing operators, new machine
3 days typical duration
- For experienced lift-truck operators converting to this machine.
- Tutor-led, at your premises on your own machine
- Theory and practical operating skills
- Assessment and certificate included
Refresher course
Re-training for current operators
1 day typical duration
- Recommended every 3–5 years, or after an incident or change of duties.
- Tutor-led, at your premises on your own machine
- Theory and practical operating skills
- Assessment and certificate included
The qualification · Quick answer
What is counterbalance forklift training?
Counterbalance forklift training prepares operators to work a counterbalance forklift safely and competently. The counterbalance forklift (forks at the front, a counterweight at the rear) is the most widely used warehouse and yard truck. It is delivered in-company to HSE’s L117 standard, with an ITSSAR-accredited or KeyOstas in-house certificate on successful assessment.
- Delivered to HSE’s L117 Approved Code of Practice
- ITSSAR-accredited (TOPS) or KeyOstas in-house certificate
- Novice, experienced-operator and refresher levels
- In-company, on your site, on your own machine
Under the Provision and Use of Work Equipment Regulations (PUWER) and HSE’s L117 Approved Code of Practice, employers must make sure lift-truck operators are adequately trained. The counterbalance is the workhorse of warehouses, factories and yards across the UK. KeyOstas delivers counterbalance forklift training at your premises, so operators learn in their real working environment, and you choose an ITSSAR-accredited certificate or a KeyOstas in-house one.
- 3 levelsNovice, experienced and refresher
- L117Trained to the HSE code of practice
- ITSSARAccredited, or in-house certificate
- Since 1984KeyOstas training experience
The machine
Where the counterbalance forklift works
The counterbalance forklift is the default truck of UK industry. A counterweight at the rear balances the load on the front forks, so it needs no outriggers or guidance and can work almost anywhere with a firm, level surface, loading lorries, moving palletised goods and feeding production lines.
Because it is so widely used, it is also the truck involved in the most workplace transport incidents. That is why competent manoeuvring, pedestrian awareness and load stability sit at the centre of the course.
Typical settings
- Warehouses
- Distribution centres
- Manufacturing & production
- Loading bays
- Builders’ merchants
- Cold stores
- Ports & yards
- Retail goods-in
Is it right for you
Is this the right counterbalance forklift course?
KeyOstas trains operators at every level. Pick the course that matches your operators’ experience.
Right for you if…
- You have new operators who need to learn the counterbalance forklift from scratch
- You have experienced lift-truck operators converting to this machine type
- Your operators’ training is due for a refresher, or it has been three or more years
- Your site or clients require ITSSAR-accredited, TOPS-registered training
- You want operators trained in-company, on your own machine and site
A different course fits better if…
- Your operators need a different truck type: KeyOstas covers the full range of lift trucks
- You need access-platform training: see MEWP training
- You are training instructors: see the Forklift & Plant Instructor course
After the course
What you will be able to do
By the end of the course your operators will be able to work the counterbalance forklift safely, efficiently and to the required standard.
Operate safely
Check the truck
Carry out a thorough pre-use inspection and report defects correctly.
Handle loads
Lift, move, stack and de-stack loads safely and within the truck’s rated capacity.
Read stability
Understand truck stability, the data plate and the limits of safe operation.
Work to the standard
Know the law
Understand PUWER, LOLER and the L117 responsibilities that apply to operators.
Manage the workplace
Operate safely around pedestrians, racking, vehicles and changing ground conditions.
Be assessed
Meet the ITSSAR / L117 assessment standard in theory and practical operation.
Course content
What the counterbalance forklift course covers
The course is delivered through tutor-led theory and hands-on practical operation, organised into four areas and assessed throughout.
1
The truck, the law and your responsibilities
- Health and safety law, PUWER and LOLER
- HSE’s L117 Approved Code of Practice for lift-truck operator training
- The operator’s responsibilities and duty of care
2
Pre-use checks and the working environment
- Daily pre-use inspection and reporting defects
- Workplace hazards, pedestrians and segregation
- Racking, loading areas and safe ground conditions
3
Operating the counterbalance forklift
- Manoeuvring, steering and reversing the counterbalance truck
- Lifting, travelling with and placing loads
- Stacking and de-stacking loads at height
4
Stability, loads and safe operation
- Truck stability, the data plate and rated capacity
- Handling, stacking and de-stacking loads safely
- Refuelling, battery charging and end-of-shift procedures
Assessment
How operators are assessed
Assessment follows the ITSSAR and L117 standard: theory and practical, on the machine.
THEORY
Theory assessment
A theory test covering the law, truck knowledge, stability and safe operating practice.
PRACTICAL
Practical assessment
A practical test of pre-use checks, manoeuvring and load handling, assessed on the machine.
On passing, operators receive an ITSSAR-accredited certificate (and TOPS registration) or a KeyOstas in-house certificate, your choice, both to the L117 standard.
Certification
Two ways to certify your operators
KeyOstas can certify Counterbalance Forklift operators two ways, both delivered to the same training standard.
ITSSAR-accredited
Independently verified
- CertificateITSSAR-accredited, with the accreditation and instructor numbers
- RegisterOperators added to the TOPS (Trained Operator Passport Scheme) register
- Best forSites and clients that ask for accredited, independently verifiable training
KeyOstas in-house
Practical and flexible
- CertificateA KeyOstas certificate of training
- StandardDelivered to the same L117 training standard, tailored to your site
- Best forEmployers who need compliant operator training without the accreditation overhead
Both meet the standard. Accreditation is voluntary: HSE’s L117 Approved Code of Practice sets the training standard whichever route you choose. Talk to our team about which fits your site and clients.
The numbers
Operator training you can rely on
- Since 1984KeyOstas has delivered health, safety and operator training across the UK.
- In-companyDelivered at your premises, on your own machines, anywhere in the UK.
- Novice–refresherCourse levels for every operator, from new starters to refreshers.
Why KeyOstas
Why train your operators with KeyOstas?
ITSSAR-accredited, in-company, and delivered by registered instructors. Here is what you get.
ITSSAR-accredited training provider
KeyOstas delivers to ITSSAR standards and the HSE L117 Approved Code of Practice, with TOPS registration on accredited courses.
Accredited or in-house certificate
Choose an ITSSAR-accredited certificate, or a KeyOstas in-house certificate, both delivered to the same L117 training standard.
Specialists since 1984
Health, safety and operator training, led by experienced, registered instructors.
In-company, UK-wide
Delivered at your premises on your own machines, anywhere in the UK, on dates that suit your operation.
Novice to refresher
Course levels for every operator: new starters, experienced operators converting machines, and refresher training.
One point of contact
From first enquiry to certification, a dedicated team handles your booking, machine requirements and any tailored content.
The plant operator range
Other plant operator courses
KeyOstas delivers the full range of lift-truck and plant operator training.
FAQ
Counterbalance Forklift Training: frequently asked questions
Is counterbalance forklift training a legal requirement?
Employers must ensure lift-truck operators are adequately trained under PUWER and HSE’s L117 Approved Code of Practice. The certificate is not a licence, but it is the recognised evidence that training was delivered to standard.
Do I need an ITSSAR-accredited certificate, or is in-house enough?
Both are valid. Accreditation is voluntary: an ITSSAR-accredited certificate is independently verifiable and added to the TOPS register, while a KeyOstas in-house certificate is delivered to the same L117 standard. Choose based on what your sites and clients ask for.
How long is the course?
It depends on experience: a novice course is typically 5 days, an experienced-operator course 3 days, and a refresher 1 day. Durations also flex with the number of candidates. Talk to us for an exact quote.
How many operators can be trained at once?
Practical lift-truck training runs at up to three candidates per instructor. Fewer candidates means a shorter course; we will confirm the duration for your group.
What are the ITSSAR categories B1, B2 & B3?
ITSSAR categories B1, B2 and B3 cover counterbalance forklift trucks by lifting capacity. These category codes are ITSSAR’s classification for this truck type. KeyOstas covers them all. If your site has specified a code, this is the right course.
How often is refresher training needed?
There is no fixed legal interval, but HSE and ITSSAR recommend refresher training every three to five years, and sooner after an incident, a near miss, or a change of working duties or equipment.
Can you train at our premises on our own truck?
Yes. All KeyOstas plant operator training is delivered in-company, at your site, on your own machine, so operators train in the real working environment, anywhere in the UK.
Is KeyOstas an approved training provider?
Yes. KeyOstas is an ITSSAR-accredited training provider and has delivered operator training since 1984.
Cancellation terms for in-company courses
Notice of cancellation is required in writing.
Telephone cancellations will be accepted but be confirmed in writing within seven (7) days. Substitution of delegates will incur no charge.
The amount of the course fee that is still applicable will be determined as standard according to the following rules:
| Cancellation Notice | Fee Payable: | If transferred to later date: |
|---|---|---|
| No Show | FULL | FULL |
| 5 days or less | FULL | FULL |
| 6 to 10 days | 75% | 50% |
| 11 to 15 days | 50% | 25% |
| 16 to 20 days | 25% | 10% |
For NEBOSH and IEMA Courses:
| Cancellation Notice | Registration Fees Payable: | If transferred to later date: |
|---|---|---|
| 30 days or less | FULL | FULL |
N.B. Days = Working Days
Upon receipt of completed Booking Form an Invoice and Course Joining Instructions will be issued.
TERMS: STRICTLY 30 DAYS NET FROM INVOICE DATE (unless otherwise agreed)
Train your counterbalance forklift operators with KeyOstas
Talk to our team about in-company counterbalance forklift training, ITSSAR-accredited or in-house, at your premises anywhere in the UK.
Get an in-company quoteMake an enquiry
Last reviewed: May 2026, checked against current course content and HSE guidance.









